I want to change the IP address of the touch panel.
This section explains how to change the IP address of the VT5 from the VT5.
For the method to use in changing the IP address from VT STUDIO, click the following link.
Setting procedure
1. Hold down a part of the screen on which there are no switches.

2. The system menu appears. Tap [System Mode].

3. The system mode appears. Tap [VT-specific settings] -> [Ethernet settings].

4. Tap [IP address].

5. Tap the part to change, enter the IP address with the ten-key pad displayed at the bottom of the screen, and then tap [ENT].

6. After changing the settings, tap [Ethernet settings].

7. Tap [To operation mode] to restart the VT5 and apply the changed IP address.
