Quick Delivery and Comprehensive Support Most products are in stock and ready for same-day shipping - contact us to get your order started
  1. Home
  2. Products
  3. Measurement Sensors
  4. Optical Micrometer / Laser Micrometer
  5. Thrubeam Type Laser Detection Sensor
  6. Models
  7. Amplifier Unit, DIN Rail Type

Thrubeam Type Laser Detection SensorIB series

Amplifier Unit, DIN Rail Type



Select Language




DIN rail mount

Main unit/Expansion unit

Expansion unit

Head compatibility



Display resolution

0.01 %, 0.1 %, 1 % (switchable)

Display range

–99.999 to 99.999, –99.99 to 99.99
–99.9 to 99.9, –99 to 99 (switchable)

Digital display method

Upper level: 5 red digits
Lower level: 5 green digits

Operating indicators

Judgment indicator: 2-color (green/red) LED (HI, GO, LO)
Bank indicator: Green LED x 4
Laser emission warning indicator: Green LED
Others: Green LED x 8, red LED x 3

Analog output voltage


Analog current output

Control Input

Bank switch input, zero shift input

Non-voltage input *1

Control input

Zero shift input

Laser emission stop input

Timing input

Reset input

Adjust input

Control output

Judgment output (check output)

Open collector (NPN/PNP switchable, N.O./N.C. switchable) *2

Power supply

Power consumption

2400 mW or less (at 30 V, 80 mA max.) *3 *4 (including analog current output)


Power voltage

Supplied from main unit *3

Environmental resistance

Pollution degree


Ambient temperature

-10 to +50 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, compound amplitude 1.5 mm, 2 hours each for X, Y, Z axes


Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC


Approx. 140 g (including accessories)

*1 The four external input wires are assigned with desired inputs.
Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less
Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less
*2 Rated NPN open collector output: Max. 100 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less
Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), power voltage or less, residual voltage 2 V or less
*3 Use with the over current protection device which is rated 30 V or more and not more than 1 A.
*4 Does not include the power consumption of the load.
The power consumption with expansion units installed is the total of each amplifier unit’s power consumption.
Example: When using one main unit (IB-1000) with two expansion units (IB-1050) (2400 mW X 1) + (2400 mW X 2) = 7200 mW

Tips of Measurement

  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Measurement Sensors