Non-Wetted Electrode Electromagnetic Flow Sensors

FD-M series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Sensor Head 10 L/min FD-MH10

FD-MH10 - Sensor Head 10 L/min

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FD-MH10
Shape		Separate amplifier type
Rated flow range		0.5 to 10 L/min^1^2
Possible display range		0.5 to 30 L/min^*3
Connection port		Rc3/8 (10A)
Detectable fluids		Water or non-corrosive fluid
Conductivity of detection fluids		5 µS/cm or more
Detection fluid temperature		0 to 85°C 32 to 185°F, (No freezing)
Pressure loss		0.01 MPa or less
Display method		Bar display (2 colors), other indicators
Environmental resistance	Enclosure rating	IP67
	Pressure resistance	2.0 MPa
	Applied pressure range	1.0 MPa or less
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material	Liquid end materials	Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)
	Other materials	Plastic case areas : PBT, Indicator : polyalylate, Metal case areas : SUS430, Cable : PVC
Accessory		Warnings
Weight		Approx. 800 g
^1 The rated flow range indicates the range that is supposed to be used in general. ^2 The rated flow range indicates recommended operating range. ^*3 Can be used within the display range as well as within the rated flow range.