Built-in Amplifier Model: 100mm AI-B100

AI-B100 - Built-in Amplifier Model: 100mm

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.


  • CE Marking
  • CSA




Installation Distance

90 to 110 mm 3.54 to 4.33"

Detection Area

1X Zoom to 4X Zoom

8 × 8 mm 0.31 × 0.31" to 32 × 32 mm 1.26 × 1.26"*1

Digital Zoom

1X to 4X (17 steps) adjustment, zoom position adjustment*1

Light Receiving Element



Light Source

Red LED (660 nm)

Lighting Method

Pulse lighting

Detection Modes

Presence check mode / Difference check mode / Feeder mode

Response Time

Switchable between 3 ms/10 ms/20 ms/50 ms/100 ms



Bank Function

Bank slots: Up to 2

Other Functions

Filter, orientation detection, anti-blur, hysteresis, mutual interference prevention, indicator LED color change,
screen display orientation, statistics display, failure hold display, key lock function, I/O test

Display Panel

Organic LED (OLED) display


Japanese/English/Chinese (Simplified)


Main Indicator

1 (green/red/orange)

I/O Indicators

2 indicators (red): OUT1/OUT2 or IN



Non-voltage input/voltage input can be switched
Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit)
Voltage input: Maximum input rating 30 V, ON current 18 V or higher, OFF current 0.1 mA or lower, ON current 2 mA or lower (at 30 V)

Number of Inputs

1: IN or no input*2


Assignable functions: Bank/Hold (level)/Hold (edge)/Reset/External calibration/Interference prevention/Light off



Open collector output: Can be switched between NPN/PNP and N.O./N.C.
Maximum rating: 30 V 50 mA, remaining voltage 2 V or lower

Number of Inputs

1: OUT1 or 2: OUT1/OUT2*2


Assignable functions for OUT2: Error output/Judgment output 2/Interference prevention output (sync-output)

Communication Functions

IO-Link: Specification v. 1.1 (1.0)/COM2 (38.4 kbps)


Power voltage

20 to 30 VDC, including Ripple (P-P) 10 %

Current consumption

0.3 A or less (power voltage at 20 V, excluding the output load)

Environmental resistance

Enclosure rating


Ambient temperature

-10 to +50 °C 14 to 122 °F (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of 6 directions


Main unit case: Zinc die-cast/PBT; Front cover: Acrylic (hard coating); Operation indicator: TPU;
Button: POM; Display sheet: PET; Polarizing filter body: POM


Approx. 120 g (including polarized filter)

*1 When positioned in the midpoint of the installation distance range.
*2 Used with OUT2 or IN assigned to I/O line (white line or 2nd pin of M12 connector).
*3 Except when polarized filters or dome filters are mounted.

Data Sheet (PDF) Other Models