Recent Searches
    Series ( results)
      Models ( results)
          1. Home
          2. Products
          3. Sensors
          4. Positioning Sensors
          5. Thrubeam Type Laser Detection Sensor
          6. Models
          7. Amplifier Unit, Panel Mount Type

          Thrubeam Type Laser Detection SensorIB series

          Amplifier Unit, Panel Mount Type



          Select Language




          Panel mount

          Main unit/Expansion unit

          Main unit

          Head compatibility



          Display resolution

          0.01 %, 0.1 %, 1 % (switchable)

          Display range

          –99.999 to 99.999, –99.99 to 99.99
          –99.9 to 99.9, –99 to 99 (switchable)

          Digital display method

          Upper level: 2-color (green/red) 5 digits
          Lower level: 5 green digits

          Operating indicators

          Judgment indicator: 2-color (green/red) LED (HI, GO, LO)
          Bank indicator: Green LED x 4
          Laser emission warning indicator: Green LED
          Others: Green LED x 8, red LED x 3

          Analog output voltage

          ±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω *1

          Analog current output

          4 to 20 mA Maximum load resistance 350 Ω *1

          Control Input

          Bank switch input, zero shift input

          Non-voltage input *2

          Control input

          Zero shift input

          Laser emission stop input

          Timing input

          Reset input

          Adjust input

          Control output

          Judgment output (check output)

          Open collector (NPN/PNP switchable, N.O./N.C. switchable) *3

          Power supply

          Power consumption

          2550 mW or less (at 30 V, 85 mA max.) *4 *5 (including analog current output)


          Power voltage

          10 to 30 VDC, including ripple (P-P) 10% Class 2 or LPS *4

          Environmental resistance

          Pollution degree


          Ambient temperature

          -10 to +50 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, compound amplitude 1.5 mm, 2 hours each for X, Y, Z axes


          Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC


          Approx. 170 g (including accessories)

          *1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected.
          *2 The four external input wires are assigned with desired inputs.
          Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less
          Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less
          *3 Rated NPN open collector output: Max. 100 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less
          Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), power voltage or less, residual voltage 2 V or less
          *4 Use with the over current protection device which is rated 30 V or more and not more than 1 A.
          *5 Does not include the power consumption of the load.
          The power consumption with expansion units installed is the total of each amplifier unit’s power consumption.
          Example: When using one main unit (IB-1000) with two expansion units (IB-1050) (2400 mW X 1) + (2400 mW X 2) = 7200 mW

          Sensor Library

          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Back to top

          KEYENCE CORPORATION OF AMERICA 500 Park Boulevard, Suite 200, Itasca,
          IL 60143, U.S.A.
          Phone: 1-888-KEYENCE [1-888-539-3623]
          Career Opportunities: KEYENCE Career Site