Flow Sensor / Flow Meter Software

Applicable models: FD-H / FD-Q / FD-X / FD-R / FD-G

The software listed below is required when using flow sensors / flow meters.
Download a setting file when connecting to an IO-Link master.

FD-H Series

[FD-H] IO-Link Configuration File (IODD File)

This is the setting file to use when connecting the FD-H Series to an IO-Link master.

[FI-T] IO-Link Configuration File (IODD File)

This is the setting file to use when connecting the FI-T temperature sensor to an IO-Link master.

FD/FI History Reader

This is the setting file to use when using FD/FI History Reader.

FD-Q Series

[FD-Q Series] IO-Link Configuration File (IODD File)

This is the setting file to use when connecting the FD-Q Series to an IO-Link master.

FD-R Series

[FD-R Series] IO-Link Configuration File (IODD File)

This is the setting file to use when connecting the FD-R Series to an IO-Link master.

FD-X Series

[FD-X Series] USB Driver

This is the USB driver to use when using USB communication to output the data recorded on the FD-X Series to a PC or similar device.

[FD-X Series] Communication Unit Configuration File for KV STUDIO(ez1 file)

This is the setting file to use when using the FD-X Series with KV STUDIO.

[FD-X Series] IO-Link Configuration File (IODD File)

This is the setting file to use when connecting the FD-X Series to an IO-Link master.

FD-G Series

[FD-G Series] FD-G Analyzer

This software analyzes the causes when detection is not possible due to insufficient FD-G Series stability.

[FD-G Series] FD-G Monitor Update Tool

This software updates FD-G Monitor, software dedicated for use with the FD-G, to the latest version.

[FD-G Series] Communication Unit Configuration File for KV STUDIO(ez1 file)

This is the setting file to use when using the FD-G Series with KV STUDIO.

[FD-G Series] Ethernet/IP™ Configuration File (EDS file)

This is the setting file to use when using the FD-G Series with EtherNet/IP™ communication.

[FD-G Series] IO-Link Configuration File (IODD File)

This is the setting file to use when connecting the FD-G Series to an IO-Link master.